Free delivery for orders over 1500 UAH
to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta.
The commission for the imposed payment is paid by the recipient
Free delivery for orders over 1500 UAH
to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta.
The commission for the imposed payment is paid by the recipient
If you have any questions, you can contact our managers in any convenient way for you. 
$6.11
The cartridge is designed for primary (mechanical) water purification in filters with standard 10" flasks. Made of high-quality polypropylene thread with a special bactericidal treatment that inhibits the growth of bacteria on the filter surface. This design ensures effective and safe removal of mechanical contaminants, extending the service life of subsequent cartridges in the system.
Main functions:
- Removal of rust, sand, silt, scale and other particles
- Prevention of bacterial growth on the filter surface
- Protection of household filtration systems from premature clogging
Characteristics:
- Size: 10" (inches), D60*254.
- Temperature range: +5°C to +40°C
- Flow rate: up to 3 l/min (depending on pressure)
- Material: polypropylene filament with bactericidal treatment
- Resource: up to 12,000 liters or up to 6 months of use (depending on water quality)
Advantages:
- Bactericidal action extends the service life of the cartridge and reduces the risk of secondary contamination
- Suitable for use in home purification systems, before reverse osmosis, etc.
Compatibility:
Suitable for standard 10" flasks.
Caution:
Not intended for disinfection of water with active microbiological contamination.
Maintenance recommendation:
Regularly check the condition of the cartridge, especially if there is a noticeable decrease in pressure or turbidity of the water. Replacement - every 6 months or earlier with high contamination.
| Filters for water | |
| Manufacturer country | |
| Cartridge | |
| Diameter | 2.5 |
| Filtration degree, microns | 5 |
| Height | 10 |
| Lifetime | 6 month |
| Maximum water temperature | 40 °С |
| productivity | up to 3 l / min |
| Resource | 12000 l |
| type | |
| Water temperature | |
A set of replaceable cartridges is designed to purify drinking water. Used in three-hull filters "D..
$38.93
Cartridge with pressed carbon "Rosa-541" 10"This cartridge is a carbon module of activated pressed c..
$7.41
The mechanical water purification cartridge is designed to remove sand, rust and other mechanical im..
$1.70
The mechanical water purification cartridge is designed to remove sand, rust and other mechanical ..
$17.11
Linear cartridge for water mineralization. Mainly used in reverse osmosis filtration systems. Enric..
$11.19
The set of replaceable cartridges is intended for purification of drinking water. Used in three-hul..
$21.48
A set of replaceable cartridges is designed to purify drinking water. It is used in two-case filter..
$30.96
"DewRosa-704" - removes iron, uses a mixture of coal specially designed to remove iron and the smel..
$4.56
The cartridge is designed for primary (mechanical) water purification in filters with standard 10" flasks. Made of high-quality polypropylene thread with a special bactericidal treatment that inhibits the growth of bacteria on the filter surface. This design ensures effective and safe removal of mechanical contaminants, extending the service life of subsequent cartridges in the system.Main functions:- Removal of rust, sand, silt, scale and other particles- Prevention of bacterial growth on the filter surface- Protection of household filtration systems from premature cloggingCharacteristics:- Size: 10" (inches), D60*254.- Temperature range: +5°C to +40°C- Flow rate: up to 3 l/min (depending on pressure)- Material: polypropylene filament with bactericidal treatment- Resource: up to 12,000 liters or up to 6 months of use (depending on water quality)Advantages:- Bactericidal action extends the service life of the cartridge and reduces the risk of secondary contamination- Suitable for use in home purification systems, before reverse osmosis, etc.Compatibility:Suitable for standard 10" flasks.Caution:Not intended for disinfection of water with active microbiological contamination.Maintenance recommendation:Regularly check the condition of the cartridge, especially if there is a noticeable decrease in pressure or turbidity of the water. Replacement - every 6 months or earlier with high contamination...
$6.11
