Free delivery for orders over 1500 UAH to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta
Free delivery for orders over 1500 UAH to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta
$98.15
Do you want your filter to work quickly and efficiently even with low water pressure? This pump is the perfect solution for upgrading your reverse osmosis system. It provides stable pressure, so the membrane works at full capacity, and you get more clean water without waiting.
Advantages
- Significantly increases filtration speed
- Provides stable pressure for 50 / 75 / 100 GPD membranes
- Easy connection - everything you need is already included
Why do you need a pump
Membrane performance is measured in GPD (Gallons Per Day). Most household membranes measuring 11.9x1.8" have a capacity of 50 GPD, which is equal to 189 liters per day (1 Gallon = 3.785l). Membranes of 75 and 100 GPD are also widely used.
The capacity is measured under normal conditions:
water temperature = 25⁰С,
water pressure = 80 psi (5.5 bar),
salt content TDS = 200 ppm (approximately 200 mg/liter)
A decrease in pressure and temperature, as well as an increase in TDS, reduce the capacity of the membrane. For example, at a temperature of 10⁰С, the capacity of the membrane decreases by 1.71 times. And when the pressure decreases to 1 bar, the capacity drops by 5 times. Therefore, if you draw 2-3 liters of water in the morning and the tank is empty, install a pressure boosting pump.
Ideal for:
- apartments and houses with low water pressure
- reverse osmosis systems
Component
Pump — 28 l/h
Power supply (adapter 220V → 24V)
Low pressure sensor
High pressure sensor
Connection tube — 1 m
| Components | |
| Type | |
| Manufacturer country | |
The replacement element is a disposable dry tablet that is installed in the middle of the advance fl..
$7.44
The TDS meter will allow you to check the water quality at any time and not doubt the efficiency of ..
$52.59
ROSA GUARD — Universal smart resource indicator (6000 l)For any water purification systems: Trio, Du..
$81.11
Test strip for checking the pH of water.Simply dip the strip into the water and compare the readings..
$2.04
Do you want your filter to work quickly and efficiently even with low water pressure? This pump is the perfect solution for upgrading your reverse osmosis system. It provides stable pressure, so the membrane works at full capacity, and you get more clean water without waiting.Advantages- Significantly increases filtration speed- Provides stable pressure for 50 / 75 / 100 GPD membranes- Easy connection - everything you need is already includedWhy do you need a pumpMembrane performance is measured in GPD (Gallons Per Day). Most household membranes measuring 11.9x1.8" have a capacity of 50 GPD, which is equal to 189 liters per day (1 Gallon = 3.785l). Membranes of 75 and 100 GPD are also widely used.The capacity is measured under normal conditions:water temperature = 25⁰С,water pressure = 80 psi (5.5 bar),salt content TDS = 200 ppm (approximately 200 mg/liter)A decrease in pressure and temperature, as well as an increase in TDS, reduce the capacity of the membrane. For example, at a temperature of 10⁰С, the capacity of the membrane decreases by 1.71 times. And when the pressure decreases to 1 bar, the capacity drops by 5 times. Therefore, if you draw 2-3 liters of water in the morning and the tank is empty, install a pressure boosting pump.Ideal for:- apartments and houses with low water pressure- reverse osmosis systemsComponentPump — 28 l/hPower supply (adapter 220V → 24V)Low pressure sensorHigh pressure sensorConnection tube — 1 m..
$98.15
