Free delivery for orders over 1500 UAH to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta
Free delivery for orders over 1500 UAH to branches and post offices: Meest POCHTA, Nova Poshta, Ukrposhta
$128.15
This kit is designed for periodic maintenance of the ultrafiltration membrane in order to extend its service life and maintain high cleaning efficiency, and allows for backwashing of the ultrafiltration membrane in household filters.
Purpose:
Cleaning the membrane from accumulated micropollutants, colloids, organic particles and biofilm.
Restoring filtration performance.
Preventing clogging and pressure drop.
During system operation, purified water under pressure fills the storage tank. When the tap is switched on, the water from the tank flows in the opposite direction and removes contaminants from the membrane into the drain.
Recommendations for use:
Backwash every 2–3 months or as needed if there is a noticeable decrease in water flow
Use clean water without mechanical impurities for flushing
Flushing time: 5–10 minutes
Components of the kit:
1. Storage tank 0.13 gallon (11.5x11.5x21.3 cm)
2. Three-way valve JG 1/4 inch
3. Drain clamp
4. 2 m tube
5. Fitting 1/2”- JG
6. Triple fitting JG
ROSA GUARD — Universal smart resource indicator (6000 l)For any water purification systems: Trio, Du..
$81.11
The valve is glued under the filter with double-sided tape (we recommend using a low plastic box). I..
$12.41
The TDS meter will allow you to check the water quality at any time and not doubt the efficiency of ..
$52.59
The pipe cutter for pipes up to 12 mm is a special tool designed for precise and even cutting of pla..
$3.52
The replacement element is a disposable dry tablet that is installed in the middle of the advance fl..
$7.44
UV lamp is used in flow and reverse osmosis systems as the final stage of water purification, more ..
$60.67
Indicator strips are designed to determine the hardness of any fresh water, water from a pipeline, f..
$1.85
This kit is designed for periodic maintenance of the ultrafiltration membrane in order to extend its service life and maintain high cleaning efficiency, and allows for backwashing of the ultrafiltration membrane in household filters.Purpose:Cleaning the membrane from accumulated micropollutants, colloids, organic particles and biofilm.Restoring filtration performance.Preventing clogging and pressure drop.During system operation, purified water under pressure fills the storage tank. When the tap is switched on, the water from the tank flows in the opposite direction and removes contaminants from the membrane into the drain.Recommendations for use:Backwash every 2–3 months or as needed if there is a noticeable decrease in water flowUse clean water without mechanical impurities for flushingFlushing time: 5–10 minutesComponents of the kit:1. Storage tank 0.13 gallon (11.5x11.5x21.3 cm)2. Three-way valve JG 1/4 inch3. Drain clamp4. 2 m tube5. Fitting 1/2”- JG6. Triple fitting JG..
$128.15
